全志在线开发者论坛

cube_work

cube_work

参考： https://bbs.aw-ol.com/topic/158/完整支持buildroot-2021-lts构建d1开发板sd卡系统镜像

make busybox-menuconfig

勾选 Networking Utilities ---> telnetd

QQ截图20210721172126.png

然后执行 make

用 win32diskimager 烧录 output/images/sdcard.img 到 TF卡，插TF卡启动即可。

cube_work

@webb_2002
我感觉V3s跑不动啊，这是我在全志T3上跑的，感觉都有点吃力，如果V3s上能跑，真的是牛人啊。
https://whycan.com/t_6411.html#p67017

cube_work

看来这是一网打尽了市场上所有spi nand了。

cube_work

@xiaowenge
我觉得楼上说得很有道理，可以考虑一下。

cube_work

配置文件： tina_d1_open/device/config/chips/d1/configs/nezha/sys_partition.fex

[partition_start]

[partition]
    name         = boot-resource
    size         = 8064
    downloadfile = "boot-resource.fex"
    user_type    = 0x8000


[partition]
    name         = env
    size         = 504
    downloadfile = "env.fex"
    user_type    = 0x8000

[partition]
    name         = env-redund
    size         = 504
    downloadfile = "env.fex"
    user_type    = 0x8000

[partition]
    name         = boot
    size         = 20664
    downloadfile = "boot.fex"
    user_type    = 0x8000

[partition]
    name         = rootfs
    size         = 40824
    downloadfile = "rootfs.fex"
    user_type    = 0x8000

[partition]
    name         = dsp0
    size         = 1008
    downloadfile = "dsp0.fex"
    user_type    = 0x8000

[partition]
    name         = recovery
    size         = 28224
    ;downloadfile = "recovery.fex"
    user_type    = 0x8000

"boot-resource.fex" 开机画面
"env.fex" uboot参数
"rootfs.fex" squashfs根文件系统

cube_work

@yuzukitsuru @whycan

谢谢两位，搞定啦。

lichee/linux-5.4/drivers/hid/usbhid/Kconfig

menu "USB HID Boot Protocol drivers"
        depends on USB!=n && USB_HID!=y && EXPERT

config USB_KBD
        tristate "USB HIDBP Keyboard (simple Boot) support"
        depends on USB && INPUT
        ---help---
          Say Y here only if you are absolutely sure that you don't want
          to use the generic HID driver for your USB keyboard and prefer
          to use the keyboard in its limited Boot Protocol mode instead.

          This is almost certainly not what you want.  This is mostly
          useful for embedded applications or simple keyboards.

          To compile this driver as a module, choose M here: the
          module will be called usbkbd.

          If even remotely unsure, say N.

config USB_MOUSE
        tristate "USB HIDBP Mouse (simple Boot) support"
        depends on USB && INPUT
        ---help---
          Say Y here only if you are absolutely sure that you don't want
          to use the generic HID driver for your USB mouse and prefer
          to use the mouse in its limited Boot Protocol mode instead.

          This is almost certainly not what you want.  This is mostly
          useful for embedded applications or simple mice.

          To compile this driver as a module, choose M here: the
          module will be called usbmouse.

神奇了，一定要屏蔽 USB_HID 才能打开 USB_KBD和 USB_MOUSE

难道是互斥的吗？

cube_work

Error: G2D_CMD_BITBLT_H failed: Operation not permitted
Error: src_addr=4288675840 src.format=10 src_wh=[1024 600] src_clip=[0 0 1024 600] dst_addr=4290772992 dst.format=10 dst_wh=[1024 1200] dst_clip=[0 0 1024 600]

我的也炸了

cube_work

running CONFIG_SHELL=/bin/bash /bin/bash ./configure --target=arm-openwrt-linux --host=arm-openwrt-linux --build=x86_64-linux-gnu --program-prefix= --program-suffix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib --sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man --infodir=/usr/info --disable-nls --disable-python --disable-debug --without-debug --disable-resmgr --enable-aload --enable-mixer --enable-pcm --enable-rawmidi --enable-hwdep --enable-seq --enable-ucm --enable-topology --enable-alisp --with-versioned=no build_alias=x86_64-linux-gnu host_alias=arm-openwrt-linux target_alias=arm-openwrt-linux CC=arm-openwrt-linux-gnueabi-gcc CFLAGS=-Os -pipe -march=armv7-a -mtune=cortex-a7 -mfpu=neon -fno-caller-saves -Wno-unused-result -mfloat-abi=hard  -fPIC -D_FORTIFY_SOURCE=2 -Wl,-z,now -Wl,-z,relro -fpic  LDFLAGS=-L/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/staging_dir/target/usr/lib -L/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/staging_dir/target/lib -L/opt/D1/tina_d1_open_v2_debug6_t113/prebuilt/gcc/linux-x86/arm/toolchain-sunxi-glibc/toolchain/usr/lib -L/opt/D1/tina_d1_open_v2_debug6_t113/prebuilt/gcc/linux-x86/arm/toolchain-sunxi-glibc/toolchain/lib -specs=/opt/D1/tina_d1_open_v2_debug6_t113/build/hardened-ld-pie.specs -znow -zrelro -ldl  LIBS= CPPFLAGS=-I/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/staging_dir/target/usr/include -I/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/staging_dir/target/include -I/opt/D1/tina_d1_open_v2_debug6_t113/prebuilt/gcc/linux-x86/arm/toolchain-sunxi-glibc/toolchain/usr/include -I/opt/D1/tina_d1_open_v2_debug6_t113/prebuilt/gcc/linux-x86/arm/toolchain-sunxi-glibc/toolchain/include  --no-create --no-recursion
configure: WARNING: unrecognized options: --disable-nls, --disable-debug
configure: loading site script /opt/D1/tina_d1_open_v2_debug6_t113/build/site/arm
checking build system type... x86_64-pc-linux-gnu
checking host system type... arm-openwrt-linux-gnu
./configure: line 2339: AM_INIT_AUTOMAKE: command not found
./configure: line 2341: syntax error near unexpected token `INSTALL_M4,'
./configure: line 2341: `AM_CONDITIONAL(INSTALL_M4, test -n "${ACLOCAL}")'
Makefile:314: recipe for target 'config.status' failed
make[3]: *** [config.status] Error 2
make[3]: Leaving directory '/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/compile_dir/target/alsa-lib-1.1.4.1'
Makefile:120: recipe for target '/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/compile_dir/target/alsa-lib-1.1.4.1/.built' failed
make[2]: *** [/opt/D1/tina_d1_open_v2_debug6_t113/out/t113-nezha/compile_dir/target/alsa-lib-1.1.4.1/.built] Error 2
make[2]: Leaving directory '/opt/D1/tina_d1_open_v2_debug6_t113/package/libs/alsa-lib'
package/Makefile:192: recipe for target 'package/libs/alsa-lib/compile' failed
make[1]: *** [package/libs/alsa-lib/compile] Error 2
make[1]: Leaving directory '/opt/D1/tina_d1_open_v2_debug6_t113'
/opt/D1/tina_d1_open_v2_debug6_t113/build/toplevel.mk:304: recipe for target 'package/libs/alsa-lib/compile' failed
make: *** [package/libs/alsa-lib/compile] Error 2

#### make failed to build some targets (5 seconds) ####

然后怎么 make 都是炸了，修复的办法：

rm out/t113-nezha/compile_dir/target/alsa-lib-1.1.4.1 -rf

make package/libs/alsa-lib/compile

cube_work

@yuzukitsuru @whycan

谢谢两位，搞定啦。

lichee/linux-5.4/drivers/hid/usbhid/Kconfig

menu "USB HID Boot Protocol drivers"
        depends on USB!=n && USB_HID!=y && EXPERT

config USB_KBD
        tristate "USB HIDBP Keyboard (simple Boot) support"
        depends on USB && INPUT
        ---help---
          Say Y here only if you are absolutely sure that you don't want
          to use the generic HID driver for your USB keyboard and prefer
          to use the keyboard in its limited Boot Protocol mode instead.

          This is almost certainly not what you want.  This is mostly
          useful for embedded applications or simple keyboards.

          To compile this driver as a module, choose M here: the
          module will be called usbkbd.

          If even remotely unsure, say N.

config USB_MOUSE
        tristate "USB HIDBP Mouse (simple Boot) support"
        depends on USB && INPUT
        ---help---
          Say Y here only if you are absolutely sure that you don't want
          to use the generic HID driver for your USB mouse and prefer
          to use the mouse in its limited Boot Protocol mode instead.

          This is almost certainly not what you want.  This is mostly
          useful for embedded applications or simple mice.

          To compile this driver as a module, choose M here: the
          module will be called usbmouse.

神奇了，一定要屏蔽 USB_HID 才能打开 USB_KBD和 USB_MOUSE

难道是互斥的吗？

cube_work

D1s 的 usb host 口插U盘正常，插键盘没有生成 /dev/input/event* ，这个怎么解决呢？

cube_work

@cube_work

添加了一些调试代码：

root@TinaLinux:/# softap_up aaa 13800138000
***************************
Start hostapd test! ################################
***************************
wpa2-psk!
Start to set softap!
Message is: OK
Set softap finished!
[STA_WRN] !!! xradio_remove_interface: vif_id=0
killall: wpa_supplicant: no process killed
ieee80211_do_open: vif_type=3, p2p=0, ch=3, addr=dc:6a:fa:80:a7:a2
[STA] !!!xradio_vif_setup: id=0, type=3, p2p=0, addr=dc:6a:fa:80:a7:a2
[AP_WRN] ap restarting!
[AP_WRN] [HT40][xradio_start_ap][PhyModeCfg:0xc007]
[AP_WRN] vif0, AP/GO mode THROTTLE=58
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Start to start softap!
SoftAP started successfullyHaving catch sig_chld!
Message is: OK
Start softap finished!
Having catch sig_chld!
Having catch sig_chld!
aw_softap_enable_data_forward 332 : 11111111111111111111111111111111111111
aw_softap_enable_data_forward 336 : 11111111111111111111111111111111111111
Having catch sig_chld!
aw_softap_enable_data_forward 341 : 11111111111111111111111111111111111111
execute command: iptables -A FORWARD -i wlan0 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT
Having catch sig_chld!
execute command: iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT

dnsmasq: failed to bind DHCP server socket: Address already in use
Having catch sig_chld!
execute command: iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT
Having catch sig_chld!
execute command: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables v1.4.21: Couldn't load target `MASQUERADE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
Having catch sig_chld!
enable data forward failed!
root@TinaLinux:/#

发现是 iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE 命令行运行失败：

root@TinaLinux:/#
root@TinaLinux:/# iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables v1.4.21: Couldn't load target `MASQUERADE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
root@TinaLinux:/#

cube_work

root@TinaLinux:/# softap_up test 13800138000
***************************
Start hostapd test!
***************************
wpa2-psk!
Start to set softap!
Message is: OK
Set softap finished!
[STA_WRN] !!! xradio_remove_interface: vif_id=0
killall: wpa_supplicant: no process killed
ieee80211_do_open: vif_type=3, p2p=0, ch=3, addr=dc:6a:fa:80:a7:a2
[STA] !!!xradio_vif_setup: id=0, type=3, p2p=0, addr=dc:6a:fa:80:a7:a2
[AP_WRN] ap restarting!
[AP_WRN] [HT40][xradio_start_ap][PhyModeCfg:0xc007]
[AP_WRN] vif0, AP/GO mode THROTTLE=58
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Start to start softap!
SoftAP started successfullyHaving catch sig_chld!
Message is: OK
Start softap finished!
Having catch sig_chld!
Having catch sig_chld!
Having catch sig_chld!
Having catch sig_chld!

dnsmasq: failed to bind DHCP server socket: Address already in use
Having catch sig_chld!
Having catch sig_chld!
iptables v1.4.21: Couldn't load target `MASQUERADE':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
Having catch sig_chld!
enable data forward failed!
root@TinaLinux:/#
root@TinaLinux:/#

我的也炸了。

cube_work

@cube_work

同样的软件，SD NAND如果有长飞线，就是左图了。

cube_work

这个问题太薛定谔了，和卡，刷卡软件版本，线刷卡刷都可能有关系．

cube_work

[340]HELLO! BOOT0 is starting!
[344]boot0 commit : 95d7802c6274b07ba59a9e01ec45aaf4b81687cb

[382]rtc[0] value = 0x00000000
[385]rtc[1] value = 0x00000000
[388]rtc[2] value = 0x00000000
[391]rtc[3] value = 0x00000000
[393]rtc[4] value = 0x00000000
[396]rtc[5] value = 0x00000000
[399]rtc[6] value = 0x00000000
[402]rtc[7] value = 0x00000000
[405]DRAM DRIVE INFO: V0.9
[407]DRAM Type = 2 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
[412]DRAM CLK = 456 MHz
[414]DRAM zq value: 000039bb
[440]DRAM size = 64 MB
[448]dram size =64
[450]card no is 0
[452]sdcard 0 line count 4
[910]Loading boot-pkg Succeed(index=0).
[913]Entry_name        = optee
[916]unknow boot package file
[919]Ready to disable icache.

cube_work

请问多次拔插USB鼠标，MiniGUI 还能识别吗？

cube_workLV 5

@cube_work

Best posts made by cube_work

Latest posts made by cube_work